Filter Elements For EPE-Industrial Filters
Application
Filtration of hydraulic fluids, lubricants, industrial liquids and gases.
Construction
Special star pleated filter media that is mounted on a perforated support tube. It is glued with a 2-component adhesive in a longitudinal direction and with metal end-caps. Sealed with O-ring or profile seal.
Filter Media
H.....XL
Combination of inorganic glass-fibre paper laminated with protective nonwoven media, high dirt holding capacity through 2-layer glass-fibre technique.
Filtration grade: 1/3/6/10/20 um "absolute" according to ISO 4572. Performance data for ISO 16889 refer to "filter element characteristics".
Use: For highest cleanliness requirements of hydraulic fluid fluids and lubricants.
Non cleanable.
G.......
Surface filter made of stainless steel mesh 1.4401 and 1.4571, underlaid with supporting mesh.
Mesh size: 10-1500 um.
Use: For protective, surface, coarse and pre-filtration.
Cleanable, regenerative.
P......
Low-priced depth filter made from filter paper, underlaid with supporting mesh.
Made of special impregnated cellulose fibres to resist moisture and swelling.
Nominal filtration grade 5/10/25 um.
Use: For coarse and preliminary filtration.
Non cleanable.
M.......
Depth filter in stainless steel fibre 1.4404 with supporting fabric underlay.
Filtration grade 5/10/15 um "absolute according to ISO 4572.
Use: For highest cleanliness requirements with aggressive industrial and chemical liquids at high operating temperatures.
Cleanable.
VS.......
Surface filter of extremely solid reinforced fibre made of polyethylene-wrapped polypropylene fibre.
Filtration grade: 25,40 and 60 um nominal.
Use: Surface, coarse and pre-filtration.
Especially recommended for cooling lubricants.
Non cleanable.
AS......
Nonwoven media with water-absorbent material combined with glass fibre paper.
Filtration grade: 1/3/6/10/20 um "absolute" according to ISO 4572.
Use: Dehydration of hydraulics, lubricants and air.
Non cleanable.
